DT 830D Digital Multi Meter in Pakistan
Category:

DT 830D Digital Multi Meter in Pakistan

SKU: Met-03

700.00

Quantity

Description

FEATURES:

Small multi meter for your day to day needs

If you have basic knowledge about multi meters you can try this small multi meter for basic continuity checks and voltage measurements

When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to V 0 mA jack and black test lead to COM jack

When testing the current more than 200mA, connect the red test lead to OADC jack and black test lead to COM jack

When testing the temperature, connect the temperature probe to V 0 mA jack or COM jack. Please refer to the attached instruction manual for the operating instructions.

SPECIFICATION:

Functioning Range Resolution Accuracy Overload protection
DCV 200mV 100uV (0.5%rdg 2dgts) 500VDC/350VAC
2000mV 1 mV 1000VDC/750VAC
20V 10mV
200V 100mV
1000V 1V
ACV 200V 100nA (1.2%rdg 10dgts) 750VAC
750V 1V
DCA 200μA 100nA (1.0%rdg 2dgts) 500mA/250V Fuse
2000μA 1μA
20mA 10μA
200mA 100μA
10A 10 mA (1.8%rdg 3dgts) 10A Unfused
Resistor

(ohms)

200Ω 100mΩ (0.8%rdg 2dgts) Open voltage circuit approx 2.8V
2000Ω
20kΩ 10Ω
200kΩ 100Ω
2000kΩ 1kΩ
  • To avoid possible damage to the meter or to the equipment under test, follow these guidelines:
  • Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
  • Use the proper terminals, function, and range for your measurements.
  • Before measuring current, check the meter’s fuses and turn power off to the circuit before connecting the meter to the circuit.
  • Before rotating the range switch to change functions, disconnect test leads from the circuit under test.
  • Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
  • Remove test leads from the meter before opening the Meter case.
  • To avoid possible damage to the meter or to the equipment under test, follow these guidelines:
  • Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
  • Use the proper terminals, function, and range for your measurements.
  • Before measuring current, check the meter’s fuses and turn power off to the circuit before connecting the meter to the circuit.
  • Before rotating the range switch to change functions, disconnect test leads from the circuit under test.
  • Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
  • Remove test leads from the meter before opening the Meter case

Additional information

Weight 0.1 kg